Split wall mounted thermal gas mass flowmeter
Main Features


Product Advantages
Application Scenarios
Industrial production: Gas flow measurement in industries such as steel, metallurgy, petrochemicals, and power.
Environmental protection: smoke emission monitoring, sewage treatment, etc.
Medical and health services: hospital oxygen supply systems, ventilators, etc.
Scientific research: laboratory gas flow measurement, etc.
Performance Index
Electrical performance index | ||
Work power | power | 24VDC or 220VAC, Power consumption ≤18W |
Pulse output mode | A. frequency output, 0-5000HZ output, the corresponding instantaneous flow, this parameter can set the button. | |
B. equivalent pulse signal, the isolated amplifier output, high level of more than 20V and the low level is less than or equal to 1V, the unit volume can be set on behalf of the pulse range: 0.0001m3~100m3. Note: select the output equivalent pulse signal frequency is less than or equal to 1000Hz | ||
RS-485 communication (photoelectric isolation) | using RS-485 interface, can be directly connected with the host computer or the two remote display table, medium temperature, pressure and standard volume flow and standard with temperature and pressure compensation after the total volume | |
correlation | 4 ~ 20mA standard current signal (photoelectric isolation, HART communication) and the standard volume is proportional to the corresponding 4mA, 0 m3/h, 20 mA corresponding to the maximum standard volume (the value can be set at a level menu), standard: two wire or three wire, the flowmeter can automatically identify the inserted module according to the current correct and output | |
Control alarm signal output | 1-2 line Relay, Normally Open state, 10A/220V/AC or 5A/30V/DC |




Write your message here and send it to us