Wholesale China Wet Gas Flow Meter Factory Suppliers - Turbine flowmeter – ANGJI
Wholesale China Wet Gas Flow Meter Factory Suppliers - Turbine flowmeter – ANGJI Detail:
Product Overview
Volume flow converter is a liquid flow metering converter developed by our company. Liquid turbine, elliptical gear, double rotor and other volumetric flow meters.
Main Features
1.LCD dot matrix display, Instant flow rate and totalized flow and temperature and pressure value can be displayed simultaneously with high-brightness backlight,simple and clear operation;
2.The dual probe technique can effectively improve the detection signal intensity and restrain the interference caused by pipeline vibration;
3.K-Factor linearity: RJHN provides 1 to 10 points k-Factor correction;
4. Adopting the leading real-time gain control and adaptive spectral filtering techniques the interference signals caused by vibration and pressure fluctuation are effectively suppressed;
5.Easy to use: only through the software or equipment key to set a number of parameters, you can measure a variety of instrument caliber liquid volume flow and mass flow;
6.The 16 bit microcomputer chip has the advantages of high integration, small size, good performance and strong function of the whole machine.No mechanical movable parts, stable and reliable, long life, long-term operation without special maintenance;
7.Intelligent flow meter flow probe, microprocessor, pressure and temperature sensor(Pt100or Pt1000) in one, take the built-in combination, make the structure more compact, can flow, pressure and temperature measurement of fluid directly, and real-time automatic tracking compensation and compression factor correction;
8.With EEPROM technology, the parameter setting is convenient and can be permanently saved, and the longest historical data can be saved for one year;
9.It has self checking function, rich self checking information, convenient for user to overhaul and debug;
10.With independent password settings, anti-theft function is reliable, parameters, total clearance and calibration can be set at different levels of passwords, user-friendly management;
11.The converter can output frequency pulse, 4 ~ 20mA analog signal, and has RS485 interface, can be directly connected with the microcomputer;
12.The converter shows 360 degree rotation, and it is easy to install and use;
13.The power consumption of the whole machine is low, the external power supply and battery power supply can be supplied, and the power supply mode can be switched automatically;
14.Multi physical parameters alarm output, which can be chosen by users, output the switch signal.
Performance Index
Electrical performance index |
|
Work power |
A. power supply: 24VDC + 15%, for 4 ~ 20mA output , pulse output, alarm output, RS-485 etc |
B. internal power supply: 1 groups of 3.6V lithium battery (ER26500) can be used for 2 years, when the voltage is less than 3.0V, the undervoltage indication | |
Power consumption of whole machine |
A. external power supply: <2W |
B. battery power supply: average power consumption of 1mW, can be used for more than two years | |
Pulse output mode |
A. sensor pulse signal, pulse signal flow sensor, the isolated amplifier output, high level of more than 20V and the low level of less than 1V; frequency output, 0-5000HZ output, the corresponding instantaneous flow, this parameter can set the button |
B. equivalent pulse signal, the isolated amplifier output, high level of more than 20V and the low level is less than or equal to 1V, the unit volume can be set on behalf of the pulse range: 0.0001m3~100m3.
Note: select the output equivalent pulse signal frequency is less than or equal to 1000Hz;Can be matched with a valve controller made of IC card prepayment system, high level output signal amplitude is larger than 2.8V, low level amplitude less than 0.2V |
|
RS-485 communication (photoelectric isolation) |
using RS-485 interface, can be directly connected with the host computer or the two remote display table, medium temperature, pressure and standard volume flow and standard with temperature and pressure compensation after the total volume |
Correlation |
4 ~ 20mA standard current signal (photoelectric isolation) and the standard volume is proportional to the corresponding 4mA, 0 m3/h, 20 mA corresponding to the maximum standard volume (the value can be set at a level menu), standard: two wire or three wire, the flowmeter can automatically identify the inserted module according to the current correct and output |
Control alarm signal output |
A. alarm signal (LP): photoelectric isolation, high level alarm, alarm level can be set, 12V~+24V working voltage, maximum load current of 50mA |
B. warning signal (UP): photoelectric isolation, high level alarm, alarm level can be set, 12V~+24V working voltage, maximum load current of 50mA | |
C. off valve alarm output (IC card controller with BC end): logic gate output circuit, the normal output low, amplitude is less than or equal to 0.2V; the alarm output level, amplitude is larger than 2.8V, the load resistance is greater than or equal to 100k | |
D. battery undervoltage alarm output (IC card controller with BL end): logic gate output circuit, the normal output low, amplitude is less than or equal to 0.2V; the alarm output level, amplitude is larger than 2.8V, the load resistance is greater than or equal to 100k |
Model Series
Model |
Functions |
RJHNW |
Chinese and English display;Set temperature and pressure compensation;3.6V lithium battery power supply |
RJHNW-3S |
3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface |
RJHNW-3RZ |
3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface;RS485 |
RJHNW-2ES |
2-wire 4~20mA output; 3-wire 4~20mA output,3-wire Pulse output, Battery-powered,IC card controller interface |
RJHNW-2ER |
2-wire 4~20mA output; 3-wire 4~20mA output,3-wire Pulse output, Battery-powered,IC card controller interface;rs485 |
RJHNW-2E |
4~20mA with HART, Battery-powered,IC card controller interface . |
RJHNW-3D |
3-wire 4~20mA output,3-wire Pulse output, Battery-powered,IC card controller interface ,Upper and lower limit alarm output. |
RJHNW-4D |
4-wire 4~20mA output,3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface . |
RJHNW-3RA |
4-wire with RS485,3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface . |
RJHNW-3DZA |
4-wire with RS485,3-wire 4~20mA output,3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface . |
RJHNW-4DZA |
4-wire with RS485, 4-wire 4~20mA output,3-wire Pulse output,Battery-powered,Upper and lower limit alarm output, IC card controller interface . |
Product detail pictures:
Related Product Guide:
We now have a skilled, performance team to supply good quality services for our consumer. We often follow the tenet of customer-oriented, details-focused for Wholesale China Wet Gas Flow Meter Factory Suppliers - Turbine flowmeter – ANGJI , The product will supply to all over the world, such as: Swaziland, Jamaica, New Zealand, Due to our good goods and services, we've received good reputation and credibility from local and international customers. If you will need more information and are interested in any of our solutions, be sure to feel free to contact us. We look forward to becoming your supplier in the near future.
By Rachel from European - 2017.09.22 11:32
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Michelle from Venezuela - 2017.10.13 10:47